What are some matters that cannot be ignored when using UV curing machine?
UV curing machine The UV curing machine is widely used. There are several matters that cannot be ignored in the use of UV curing machine. The matters needing attention in the work of UV curing machine mainly include:
Precautions I. use of lamp and maintenance of lamp tube. The use of UV lights on and off is particular.
1. Turn on the lights in sequence when turning on the lights. Each lamp shall be turned on at an interval of about 1 minute. It cannot be turned on at the same time.
2. After turning off the lamp, the fan shall continue to operate for a period of time until the lamp tube cools down.
3. If you need to restart after turning off the light, be sure to wait until the pipe is bent and cooled.
4. It cannot be used immediately after turning on the light. Preheating is required.
5. The lamp tube shall be replaced after it has been used for a certain period of time and reaches its service life.
6. Pay attention to the cleaning of the lamp surface after using the UV lamp for a period of time.
Note 2. With the extension of UV lamp service time, the energy will decay, so pay attention to slow down the speed.
Precautions 3. Pay attention to transformer and capacitor. The incoming line of the transformer needs to select the appropriate terminal according to the on-site voltage. After the capacitor is used, it must be discharged if it is repaired. In addition, do not look directly at the surface of the lamp tube when turning on the lamp.
When using UV curing machine we should pay attention to these matters. Only in this way can we ensure the use efficiency of the equipment and the safety of operation.