What is the maintenance knowledge of UV curing machine?
Analysis of UV curing machine The maintenance is mainly divided into daily maintenance, monthly maintenance and quarterly maintenance. Next, sankun technology will explain the maintenance knowledge of UV curing machine:
Daily maintenance: the daily maintenance of UV curing machine refers to the maintenance in daily work. The daily maintenance is divided into the following points:
1. Check whether the fan and motor operate normally and whether there is abnormal sound. If there is abnormal sound, immediately turn off the UV curing machine and notify the machine maintenance.
2. After turning on the lamp, check whether the UV lamp tube is on. If it is not on, notify the machine maintenance.
Monthly maintenance: the monthly maintenance of UV curing machine refers to the regular inspection and maintenance every month. The monthly maintenance is divided into the following points:
1. Check whether the vent of UV curing machine is blocked and clean the dust.
2. Check whether the UV lamp current is normal and whether the circuit is aging.
3. Check whether the fan and motor operate normally and whether the motor speed regulation can meet the working requirements.
4. Check whether the transmission facilities are in good condition, and add oil to the transmission chain and sprocket.
5. Whether the light intensity of UV lamp can still meet the working standard and whether the lamp is aging.
6. Clean the dust inside the UV machine.
Quarterly maintenance: the quarterly maintenance of UV curing machine refers to the regular inspection and maintenance of UV curing machine every quarter. The quarterly maintenance is divided into the following points:
1. Check whether the circuit and switch of UV curing machine are normal.
2. Oil the motor transmission.
3. Check whether the transformer works normally. The insulation of the transformer shall not be less than 5 megohm. If not, the transformer shall be dried again.
4. Wipe the reflector with soft rags stained with alcohol. 5. Check whether the drive shaft and sprocket of UV curing machine are loose and whether the two sprockets are vertical.
6. Whether Analysis of UV curing machine the tightness of mesh belt is appropriate. Good maintenance of UV curing machine can prolong the service life of the machine. Generally, good maintenance of the machine refers to the care of the machine in daily operation. Barbaric operation is prohibited, the machine is switched on and off correctly, and stable voltage equipment is equipped.
