Coating effect of curtain machine and common disadvantages of general paint coating
The automatic shower curtain machine is suitable for the use of UV primer, finish, floor, furniture, ceiling fan wood chips, glass, wall panels, floor tiles, plywood and other plane shower curtain.
1. The machine is suitable for UV, PU, NC, PE and other topcoat coating operations. The film thickness is adjusted very accurately to ensure the uniformity of the overall coating surface. It can be used as a mirror effect, and the surface is absolutely free of orange peel, pull lines and so on.
2. The machine is equipped with a coating recycling device, which can recycle the coating and avoid the waste of coating.
3. The paint delivery pump adopts frequency conversion speed regulation, and the flow control is stable.
4. The temperature in the heating box and the constant temperature device keep the coating temperature stable.
5. The original imported knife die is adopted, and the adjustment of film thickness is very accurate.
6. The conveyor belt is made of high-quality polyester, acid and alkali resistant and easy to clean.
7. The machine is suitable for various paint characteristics.
8. The paint supply system of the spray coating machine is supplied by the defoaming pump with defoaming function produced in the United States. At the same time, a special defoaming device is installed in the delivery pipe to ensure that the paint spraying surface is uniform and free of defects.
9. The shower curtain is generated by the pressure of the pump, the thickness is easy to adjust, and the distribution is uniform, and there is no difference in paint thickness; The paint thickness can be controlled within 0.02-0.03mm as required. The opening and closing of flow control are horizontally moved (driven by cylinder) for easy adjustment.
10. The conveying speed during spraying is relatively high, which can reach 115m / min, which not only makes the paint on the wood surface uniform, but also reduces the coating thickness of the paint. According to the needs, the consumption per unit area of paint can be reduced and the cost can be saved.
Coating effect of curtain shower
Common disadvantages of general paint coating:
Common problems of the coating film of the curtain shower are: uneven thickness of the coating film, pitting on the surface of the coating film, circular pits on the surface of the coating film, small bubbles on the surface of the coating film, unstable and broken coating film, the coating film is "orange peel", uneven gloss of the coating film, etc. In view of the above problems, the engineer will elaborate from the aspects of performance phenomena, causes and solutions. I hope our services can solve the problems you encounter in your work.
