Requirements of curtain shower for working environment
Curtain shower advantage:
1. High coating efficiency and low labor intensity can form a continuous production line.
2. The coating has high utilization rate, and only a small part of the solvent volatilizes in the coating circulation system during the coating process.
3. Simple operation, good operability, isolation and sealing operation can be implemented, and labor protection is good.
4. The film has good appearance and uniform film thickness.
5. Double shower heads can be used for coating two-component coatings.
Foshan Shuofeng Intelligent Equipment Co., Ltd. with people's understanding and understanding of paint and the key points of people's higher and higher requirements for spraying and coating, the curtain spraying machine has been more and more widely used. Although the curtain spraying machine can spray and coat workpieces efficiently and quickly, it still has certain requirements for its own working environment. For modern curtain shower, it can generally meet the requirements of constant temperature, constant humidity and clean air (air dust content < 10mg / m3); However, for the relatively simple coating production line, it is difficult to ensure constant temperature, constant humidity and clean air. If the environmental requirements of the curtain spraying machine cannot be met, there will be some errors in the coating effect, so that the coated workpiece can not achieve the satisfactory coating effect, and it is easy to cause needle (shrinkage) holes, orange peel, particles and other defects of the paint film In order to avoid pinholes and orange peel in the paint film, firstly, the temperature and humidity in the spraying room should be improved to make the temperature and humidity in the spraying room meet the process requirements; Secondly, the viscosity of construction coating and the composition of diluent shall be adjusted according to different temperature and humidity; In general, the temperature of the spraying room must be controlled below 35 ℃ and the humidity must be controlled below 80%.
After the above introduction to the working environment of the curtain shower machine, Foshan Shuofeng Intelligent Equipment Co., Ltd. must be understood by everyone. Therefore, in order to better spray and coat the workpiece efficiently and quickly, when using the curtain shower machine, we must follow the instructions of the manufacturer to ensure a working environment suitable for the curtain shower machine.
Foshan Shuofeng Intelligent Equipment Co., Ltd. is a specialized coating equipment manufacturer integrating R & D, manufacturing, sales and service. More than 20 years of manufacturing experience in UV coating industry, mainly engaged in: automation equipment, UV roller coating machine, membrane press, soil patching machine, coating machine, flat pasting machine, UV curing machine, coating equipment, coating production line, automatic feeding machine, etc.
The company introduces Italian coating technology, kneading and mature process, and develops coating production equipment with strong adaptability and strong applicability. The company's equipment is applied to the surface coating of panel furniture, calcium silicate board, glass magnesium board, flat door, cabinet, solid wood composite floor, bamboo and wood curtain and other flat parts, Curtain shower and provides scientific, rigorous and Applicable production process and equipment configuration to achieve high-quality coating effect for each customer.
