Precautions for use of UV roller coater
UV roller coating machine is also called full precision peeping coating machine. It has high production efficiency and low oil flow loss. Therefore, UV roller coating machine is widely used in furniture manufacturing industry.
Bamboo and wood crafts manufacturing industry, floor and wallboard industry have been widely used. How to use JV roller coater correctly? Xiaobian tells you how to use UV roller coater correctly.
1. Before using the UV roller coater, observe whether there are sundries, dust, etc. on the rubber and steel concrete. If there are sundries, clean them with UV special washing machine water.
2. The transfer spokes of the conveyor belt of UV roller coater should be oiled regularly. If they are used for a long time, it is easy to have poor contact between the conveyor belt and the roller. Keep lubrication after adding oil.
3. After the UV roller coater is used, clean the rubber spoke and steel Kun with washing water, clean them without sundries, and then turn off the power supply. Adjust that the steel copper is not in contact with the rubber roller, and clean the conveyor belt. 4. Paint the workpiece. First pour the paint between the rubber Kun and the steel Kun, slowly rotate the stick to make the paint evenly distributed on the rubber stick and the steel concrete, and put the workpiece on the conveyor belt after it is completely wetted. Correct operation of T roller coater can not only be well utilized, but also prolong its service life.
